manualshive.com logo in svg

D-Link NetDefend DFL-CP310, User Manual, Page: 447 / 485

Share
Download
D-Link NetDefend DFL-CP310 User Manual Download Page 447

 

Configuring Computers to Use Network Printers 

 

Chapter 15: Using Network Printers 

431 

 

The port's name is IP_<LAN IP address>.  

 

26. Click 

OK

. 

 

MAC OS-X 

This procedure is relevant for computers with the latest version of the MAC OS-X 
operating system.  

 

 

Note: 

This procedure may not apply to earlier MAC OS-X versions. 

To configure a computer to use a network printer

 

1.  If the computer for which you want to enable printing is located on the WAN, 

create an Allow rule for connections from the computer to 

This Gateway

.  

See 

T

Adding and Editing Rules

T

 on page 213. 

2. Choose 

Apple -> System Preferences

. 

Summary of Contents for NetDefend DFL-CP310






































































































































































































































































































































































































































































































Reviews:

No comments