D-Link myPocket DIR-457 User Manual Download Page 84

Page: 84 / 108

D-Link DIR-457 User Manual

Section 5 - WEB Configuration

Displays the current firmware version and date.

You can also check the availability of a new

firmware version online. If so, download the

new firmware to your hard drive.

After you have downloaded the new firmware,

click the

Browse

button to locate the firmware

update on your hard drive. Click

Upload

complete the firmware upgrade.

Current

Firmware

Information:

Firmware

Upgrade:

Firmware Update

You can upgrade the firmware of the Router here. Make sure the firmware you want to use is on the local hard drive of the computer.

Click on

Browse

to locate the firmware file to be used for the update. Click on the

Check Now

button or go to the D-Link support site for

firmware updates at http://support.dlink.com. You can download firmware upgrades to your hard drive from the D-Link support site.

Summary of Contents for myPocket DIR-457













































































































Search results

Summary of Contents for myPocket DIR-457

Reviews:

Related manuals for myPocket DIR-457

Brands by name

Popular brands

D-Link myPocket DIR-457, User Manual

Search results

Summary of Contents for myPocket DIR-457

Reviews:

Related manuals for myPocket DIR-457

Brands by name

Popular brands