D-Link myPocket DIR-457 User Manual Download Page 57

Page: 57 / 108

D-Link DIR-457 User Manual

Section 4 - Device Setup using D-Link Connection Manager (MAC OS)

Band Settings

The DIR-457 supports two band selection options:

Automatic

- The DIR-457 automatically selects the band based on

the networks available in current area and those supported by the

DIR-457.

UMTS/HSUPA Only

Restricts the DIR-457 to using 3G service on

UMTS/HSUPA bands.

GSM/GPRS/EDGE Only

Restricts the DIR-457 to using 2G service

on GSM/GPRS/EDGE bands.

To adjust the band settings follow the instructions below:

1. Click the

Profile

button.

2. Select

Band

tab.

3. Select Automatic, UMTS/HSUPA only, or GSM/GPRS/EDGE only.

4. Click

Apply

and

Profile Settings

The Profile Settings page allows you to manually change your Band and Network setting in case your DIR-457 can not automatically

connect to your network provider.

Summary of Contents for myPocket DIR-457













































































































Search results

Summary of Contents for myPocket DIR-457

Reviews:

Related manuals for myPocket DIR-457

Brands by name

Popular brands

D-Link myPocket DIR-457, User Manual

Search results

Summary of Contents for myPocket DIR-457

Reviews:

Related manuals for myPocket DIR-457

Brands by name

Popular brands