D-Link myPocket DIR-457 User Manual Download Page 20

Page: 20 / 108

D-Link DIR-457 User Manual

Section 3 - Device Setup using D-Link Connection Manager (Windows)

Ending a Connection

Establishing a Connection

The Connect/Disconnect button will be black when you are offline. You can click the Connect button to

connect to the network via the default profile. After you are connected, the button will turn green with

a checkmark. Once connected, you can use the mobile service network to browse the Internet, send

e-mail, send text messages, and perform other tasks online.

If you wish to disconnect, click the button again, and the button will turn black to indicate you have

successfully disconnected and are offline.

User-Defined Profile

1. Fill in the Profile Name, Phone Number, APN, User Name,

Password, and Authorization Type.

2. Click

Finish

to complete.

3. Click the

Advanced

button to display APN details.

4. Highlight an APN and click OK.

5. Click

Next

to continue.

Connect

Disconnect

Summary of Contents for myPocket DIR-457













































































































Search results

Summary of Contents for myPocket DIR-457

Reviews:

Related manuals for myPocket DIR-457

Brands by name

Popular brands

D-Link myPocket DIR-457, User Manual

Search results

Summary of Contents for myPocket DIR-457

Reviews:

Related manuals for myPocket DIR-457

Brands by name

Popular brands