D-Link myPocket DIR-457 User Manual Download Page 37

Page: 37 / 108

D-Link DIR-457 User Manual

Section 3 - Device Setup using D-Link Connection Manager (Windows)

Startup Options

Version Information

Users can specify how the application should start up.

1. Click

Tools

Preferences

Startup

2. Check the box next to the desired options.

• Always ask before closing a connection.

• Always ask before exiting application.

• Enable Quick Start. (This mode runs a program in the background

to help the D-Link Mobile Connection Manager launch

quickly.)

3. Click

Apply

to save the settings and finish.

Note

: Please reset these settings when you want to install on another

PC or remove the driver.

The application version, firmware version and firmware release date can be

found by selecting

Support

About D-Link Mobile Connection Manager

Summary of Contents for myPocket DIR-457













































































































Search results

Summary of Contents for myPocket DIR-457

Reviews:

Related manuals for myPocket DIR-457

Brands by name

Popular brands

D-Link myPocket DIR-457, User Manual

Search results

Summary of Contents for myPocket DIR-457

Reviews:

Related manuals for myPocket DIR-457

Brands by name

Popular brands