D-Link myPocket DIR-457 User Manual Download Page 36

Page: 36 / 108

D-Link DIR-457 User Manual

Section 3 - Device Setup using D-Link Connection Manager (Windows)

Select

Tools > Call Setting

You may select from one of the following options:

None

- No answer.

Send Busy Tone

- The caller will hear a busy tone, or will be transferred to

voice mail.

Call Forward

- The incoming call will be forwarded to the phone number you

enter into the

Telephone Number

text box.

Note

: The call settings query may fail if the network is busy; in this case please

try again later.

Call Settings

Missed Calls

1. Select

View > Missed Calls

2. If the call setting is None or Send Busy Tone, D-Link Mobile Connection

Manager AP will register the incoming call in the missed calls list.



Summary of Contents for myPocket DIR-457













































































































Search results

Summary of Contents for myPocket DIR-457

Reviews:

Related manuals for myPocket DIR-457

Brands by name

Popular brands

D-Link myPocket DIR-457, User Manual

Search results

Summary of Contents for myPocket DIR-457

Reviews:

Related manuals for myPocket DIR-457

Brands by name

Popular brands