91
DSM-520 User’s Manual
D-Link Systems, Inc.
Setup
Network
Connection:
Select
Wired
or
Wireless
. Use the
up arrow
or
down arrow
to toggle between
selections. Press
ENTER
to select the option.
Press the
down arrow
to proceed to the next
option.
Configuration:
Select
Static
or
DHCP
by pressing
the
up arrow
or
down arrow
. When the
desired option is highlighted, press
ENTER
on the remote. If Static is selected, you will
need to input the IP, Netmask, Gateway, and DNS.
Note:
A DHCP-enabled router automatically assigns IP addresses to devices on your network.
If you have a DHCP-enabled router, select
DHCP
.
If you want to change the configuration of your setup you can press the
SETUP
button on
the remote control.
For an explanation of the terminology used in the Setup functions, please see the
Glossary.
Press
SETUP
on your remote control to
access the setup features. Using the
up
arrow
and
down arrow
buttons on your
remote control, scroll down the list to highlight
your selection then press
ENTER
or the
right
arrow
to select your choice.
Navigating the menus
Use the
up
and
down arrow
buttons on the remote control to navigate between the
options. Press
ENTER
on the remote to select the highlighted item. Use the
up
and
down
arrows
to toggle through the settings. Press
ENTER
to make a selection. After making
all of your selections, you must navigate to the OK button and press
ENTER
to save the
settings. To toggle between OK and CANCEL, use the
left
and
right arrow
buttons.
Press
ENTER
in a text field, to display the onscreen keyboard. You can enter text either by
using the onscreen keyboard, or by using the digits and letters on your remote control.
Setup