94
DSM-520 User’s Manual
D-Link Systems, Inc.
Setup
System
Device Name:
You can change the name
of your DSM-520 here. To do so, press
ENTER
on the remote control with the
Device Name field highlighted. The
on-screen keyboard will appear.
Default Server:
The default server is
listed here. This field is not editable.
To change the default server, you
must select a server by going to View
All Servers. If you are using multiple
servers, such as Windows
®
Media
Connect and the D-Link
®
Media Server
software, then you must toggle between servers by selecting the server from the View All
Servers option.
View All Servers:
Navigate to this button by using the
down arrow
on the remote control.
Press
ENTER
on the remote control to view a list of all the devices that are available to share
media on your network.
System Restart:
Navigate to this button by using the
down arrow
on your remote control.
Press
ENTER
on the remote control to restart the DSM-520.
System Reset: You will lose all current settings when selecting this option. The factory defaults will
be restored and any settings you have entered will be
erased.
To navigate to this option, use the
down
arrow
on your remote control. Press
ENTER
to
perform a system reset.
Wizard:
When you select the Wizard option in the
System Setup window, you will launch the Setup
Wizard. This is the same Setup Wizard that is run
during the initial startup of your device. To run the
Setup Wizard, please refer to page 37.