40
DSM-520 User’s Manual
D-Link Systems, Inc.
The DSM-520 Setup Wizard
Please see the Glossary for an explanation of DHCP and static IP addresses.
Current Network Settings
Your current network settings are displayed
and can be modified at this point. DHCP is
the default setting. The DHCP option allows
your DHCP enabled device to assign the IP
configuration to the DSM-520.
DHCP
If your network has a DHCP server then
press the
down arrow
on the remote control
to navigate to the Next button. Once the
Next button is highlighted, press
ENTER
on
the remote control to proceed to the next
screen.
Static
If using a static IP address, press
ENTER
on the remote control with Configuration
highlighted. The
up arrow
and
down arrow
toggle between the options. Press
ENTER
to make a selection. The on-screen keyboard or numbers on the remote are used to
enter your address settings. Be sure to enter a unique IP address within the same range
as the network. After entering the appropriate settings for your network, use the
down
arrow
to navigate to the Next button. Press
ENTER
on the remote control to proceed
to the next screen.
Key (continued)
Press the
ENTER
button on the remote control with this field highlighted to enter a key.
The on-screen keyboard will be displayed and you can enter the key. Keys are defined by
entering in a string in HEX (hexadecimal - using characters 0-9, A-F) or ASCII (American
Standard Code for Information Interchange – alphanumeric characters) format.
After entering the appropriate wireless settings for your network, use the
down arrow
to
navigate to the Next button. Press
ENTER
on the remote control to proceed to the next
Encryption
64-bit
128-bit
Character
Length
Example
Character
Length
Example
HEX
10
12345678FA
26
456FBCDF123400122225271730
ASCII
5
DMODE
13
2005PIECAKES1
Character Length
Example
WPA-PSK
8-63
SCOOBY7892SNACK
