8
Configuration:
Select
Static
or
DHCP
by pressing the
up arrow
or
down
arrow
. When the desired option is highlighted, press
ENTER
on the remote. If
Static is selected, you will need to input the IP, Netmask, Gateway, and DNS.
A DHCP-enabled router automatically assigns IP addresses to devices on your
network. If you have a DHCP-enabled router, select
DHCP
.
If you do not have a DHCP -enabled router, you will select
Static
and provide
the following information:
IP:
Enter the IP address of the DSM-0.
Netmask:
Enter the subnet mask of the DSM-320.
Gateway:
Enter the IP address of the router on your network.
DNS:
Enter the IP address of the domain name server.
Setup (continued)
Entering address information:
Press
ENTER
on the remote control to select a highlighted field. Enter the
address information by using the number keys (
0-9
) on the remote control.
Use the dot button (“
.
”) on the remote control as you would when entering
an address on a computer. The
CLEAR
button will erase the entire field.
Use the
left arrow
to erase one character.
Wireless
SSID:
Enter the SSID (Service
Set Identifier, or the name of the
wireless network) by pressing
ENTER
on the remote control
when the field is highlighted.
The on-screen keyboard will
appear and you can manually
enter an SSID.
Site Survey
: When highlighted,
press
ENTER
on the remote control. A list of available SSID’s will appear.
Navigate the list using the
up
and
down arrows
.
Mode:
Ad-Hoc Mode is used for peer to peer wireless networks that do not
contain a router or an access point. Infrastructure Mode is used for networks
with an access point or router. To toggle between the two, press the
ENTER
button when Mode is highlighted. The
up arrow
and
down arrow
will toggle
between the two options. Press
ENTER
again to select.
Summary of Contents for MediaLounge DSM-320
Page 1: ...Version 1 7...
Page 104: ...104 Appendix continued Audio and Video Cables Guide...
