manualshive.com logo in svg

D-Link JustConnect DNR-4020-16P, User Manual

Share
Download
D-Link JustConnect DNR-4020-16P User Manual Download Page 39

34

D-Link DNR-4020-16P User Manual

Section 3 - Configuration

Disk

On this page you can view and configure the settings for the installed hard
drive(s).

Click this to format the specified disk. This will delete all of the data
on the disk. Make sure to back up your data before formatting.

Displays the status of the hard drive.

The hard drive serial number.

The amount of space currently used on the selected hard drive.

The disk group that the specified hard drive belongs to.

Toggle this to allow new data to overwrite old data on the specified
hard drive.

Set the length of time (in days) after which old records will be
automatically overwritten.

Format

Disk Status

Disk SN

Used Space

Disk Group

Recording

Overwrite

Expired Time

(Day)

Summary of Contents for JustConnect DNR-4020-16P








































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands