D-Link JustConnect DNR-4020-16P User Manual Download

Page: 136 / 167

131

D-Link DNR-4020-16P User Manual

Section 3 - Configuration

Device ID

Device Name

Device Type

Model

Firmware

Version

U-boot Version

Kernel Version

HDD Number

Channels

Supported

Alarm In

Alarm Out

Audio In

Audio Out

A unique ID used to identify the device.

The name used to identify the device.

Indicates the type of device (NVR).

The device’s model number.

The device’s current firmware version.

The device’s current U-boot version.

The device’s current kernel version.

The number of HDD supported by the device.

The number of channels supported by the device.

The number of Alarm In interfaces.

The number of Alarm Out interfaces.

The number of Audio In interfaces.

The number of Audio Out interfaces

System

Information

System

This page displays information about the NVR.

Summary of Contents for JustConnect DNR-4020-16P








































































































































































Search results

Summary of Contents for JustConnect DNR-4020-16P

Reviews:

Related manuals for JustConnect DNR-4020-16P

Brands by name

Popular brands

D-Link JustConnect DNR-4020-16P, User Manual

Search results

Summary of Contents for JustConnect DNR-4020-16P

Reviews:

Related manuals for JustConnect DNR-4020-16P

Brands by name

Popular brands