125
D-Link DNR-4020-16P User Manual
Section 3 - Configuration
SMTP Server
SMTP Server
Port
Username
Password
Email Sender
Alarm Receiver
1-3
SSL
Encryption
Sending
interval
Test
Enter the SMTP server to use, such as
smtp.gmail.com
.
Enter the port to connect to the SMTP server on. The default
is 25.
Enter the username for the SMTP server.
Enter the corresponding password.
Enter the address to send alert emails from.
Enter the emails that should receive the NVR’s alerts.
Enter the form of encryption to use, or select OFF.
Enter an internal between 0 and 600 seconds.
Click this to send a test email.
On this page you can configure the DNR-4020-16P’s email settings, such as the
email addresses that alerts and notifications should be sent to.