manualshive.com logo in svg

D-Link JustConnect DNR-4020-16P, User Manual

Share
Download
D-Link JustConnect DNR-4020-16P User Manual Download Page 12

7

D-Link DNR-4020-16P User Manual

Section 2 - Installation

3.  Insert the hard drive into the drive bay of the DNR-4020-16P, fitting the heads of the two screws into the slots on the 

bottom of the device. Slide the hard drive toward the center of the DNR-4020-16P so that it locks into position.    
 
 
 
 

 
 
 
 

4.  Turn the device over and secure the hard drive inside the device by screwing the provided screws into the four remaining 

holes on the bottom of the DNR-4020-16P. If desired, install a second hard drive by repeating steps 1-4. Attach the hard 
disk data cable and power cable to the device, then reattach the top cover and fasten the fixing screws.. 

 
 
 
 
 

5.  Re-attach the top cover by sliding it over the device. Re-insert the shorter screws in the rear and the longer screws in the 

sides of the cover to secure it. 

Summary of Contents for JustConnect DNR-4020-16P








































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands