13
D-Link DNR-4020-16P User Manual
Section 3 - Configuration
Channel
Name
IP Address
Protocol
Port
Username:
Password:
Remote
Channel
Enter a name to identify the channel.
Enter the IP address of the camera. If the camera is connected
to one of the NVR’s PoE ports, it will attempt to detect the IP
address automatically.
Select the protocol to use (e.g. ONVIF).
Enter the port used to connect to the camera.
Enter the username used to access the camera.
Enter the password associated with the username above.
Designate a channel for the camera’s display.
Configuring a Channel
Click the pencil icon under Operate to add a camera on a channel or to configure an existing channel.
