DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
362
After clicking the
WIDS AP Rogue Classification
tab, the following page will appear:
Figure 2-32 AP RF Scan Status – WIDS AP Rogue Classification window
The fields that can be displayed are described below:
Parameter
Description
MAC Address
The MAC address of the detected AP. This could be a physical radio interface or
VAP MAC. For D-Link APs this is always a VAP MAC address.
Status
Display the managed status of the AP, whether this is a valid AP known to the
Switch or a Rogue on the network. The valid values are:
•
Managed
- The neighbor AP is managed by the wireless system.
•
Standalone
- The AP is managed in standalone mode and configured as a valid
AP entry (local or RADIUS).
•
Rogue
- The AP is classified as a threat by one of the threat detection
algorithms.
•
Unknown
- The AP is detected in the network but is not classified as a threat by
the threat detection algorithms.
Test Description
Display the tests that were performed, which includes the following:
•
Administrator-Configured rogue AP
•
Managed SSID received form an unknown AP
•
Managed SSID from a fake managed AP
•
Fake managed AP on an invalid channel
•
AP without an SSID
•
Managed SSID detected with incorrect security configuration
•
Invalid SSID received from managed AP.
•
AP is operating on an illegal channel
•
Standalone AP is operating with unexpected configuration.
•
Unmanaged AP detected on wired network.
Condition Detected
Display whether the result of the test was true or false.
Reporting MAC Address
Display the MAC address of the AP that reported the test results.
Radio
Display which physical radio on the reporting AP was responsible for the test
results.
