DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
313
Peer Switch Statistics
Reporting Interval
(15-3600)
When clustering is supported on the switch, enter an interval that the peer switches
send its authenticated client statistics to the Cluster Controller periodically. The
reporting interval is in the range of 0, 15-3600 seconds. The value 0 means the
function is disabled. The default value is 120.
Authentication
Timeout (60-600)
Enter a time for authentication. If a CP user does not enter valid credentials within the
time, the authentication page needs to be served again in order for the client to gain
access to the network. The value is between 60 and 600 seconds.
Click the
Apply
button to accept the changes made for each individual section.
CP Configuration
This window is used to create CP configuration.
To view this window, click
Security > Captive Portal (CP) > CP Configuration
as shown below:
Figure 1-2 CP configuration - CP Summary window
The fields that can be configured or displayed are described below:
Parameter
Description
CP Configuration
Enter a name of CP configuration.
Configuration
Display the captive portal ID and name.
Mode
Display whether the CP is enabled.
Protocol
Display whether the portal uses HTTP or HTTPS.
Verification
Display which type of user verification to perform.
•
Guest
- The user does not need to be authenticated by a database.
•
Local
- The switch uses a local database to authenticated users.
•
RADIUS
- The switch uses a database on a remote RADIUS server to
authenticate users.
Languages
Display the number of languages that are configured for this captive portal.
Click the
Add
button to add a new entry based on the information entered.
Tick the check box of the specific entry, and click the
Delete
button to remove the specific entry.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
Click the link under Configuration in the table, or the tab to configure the detail information about CP configuration.
