DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
106
Figure 7-72 Multicast Group Profile Multicast Address Settings window
The fields that can be configured are described below:
Parameter
Description
Multicast Address List
Enter the multicast address list.
Click the
Add
button to add a new entry based on the information entered.
Click the
<<Back
button to discard the changes made and return to the previous window.
Click the
Delete
button to remove the specific entry.
MLD Snooping Multicast VLAN Settings
Users can add, delete, or configure the MLD snooping multicast VLAN on this page.
To view the following window, click
L2 Features > L2 Multicast Control > Multicast VLAN > MLD Snooping
Multicast Group VLAN Settings
, as show below:
Figure 7-73 MLD Snooping Multicast VLAN Settings window
The fields that can be configured are described below:
Parameter
Description
MLD Multicast VLAN
State
Click the radio buttons to enable or disable the MLD multicast VLAN state.
MLD Multicast VLAN
Forward Unmatched
Click the radio buttons to can enable or disable the MLD multicast VLAN Forward
Unmatched state.
VLAN Name
Enter the VLAN name used.
VID (2-4094)
Enter the VID value used.
Remap Priority
The user can select this option to enable the Remap Priority feature.
Specify the remap priority (0 to 7) to be associated with the data traffic to be
forwarded on the multicast VLAN. If
None
is specified, the packet’s original priority
will be used. The default setting is None.
Replace Priority
Tick the check box to specify that the packet’s priority will be changed by the switch,
based on the remap priority. This flag will only take effect when the remap priority is
set.
Click the
Apply
button to accept the changes made for each individual section.
Click the
Add
button to add a new entry based on the information entered.
