DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
192
Figure 10-65 Egress ACL Flow Meter Configuration window
The fields that can be configured are described below:
Parameter
Description
Profile ID (1-4)
Here the user can enter the Profile ID for the flow meter.
Profile Name
Here the user can enter the Profile Name for the flow meter.
Access ID (1-128)
Here the user can enter the Access ID for the flow meter.
Mode
Rate
– Specify the rate for single rate two color mode.
Rate
– Specify the committed bandwidth in Kbps for the flow.
Burst Size
– Specify the burst size for the single rate two color mode. The unit is in
kilobyte.
Rate Exceeded
– Specify the action for packets that exceed the committed rate in single
rate two color mode. The action can be specified as one of the following:
Drop Packet
– Drop the packet immediately.
Remark DSCP
– Mark the packet with a specified DSCP. The packet is set to drop for
packets with a high precedence.
trTCM
– Specify the “two-rate three-color mode.”
CIR
– Specify the Committed information Rate. The unit is Kbps. CIR should always be
equal or less than PIR.
PIR
– Specify the Peak information Rate. The unit is Kbps. PIR should always be equal to
or greater than CIR.
CBS
– Specify the Committed Burst Size. The unit is in kilobyte.
PBS
– Specify the Peak Burst Size. The unit is in kilobyte.
srTCM
– Specify the “single-rate three-color mode”.
CIR
– Specify the Committed Information Rate. The unit is in kilobyte.
CBS
– Specify the Committed Burst Size. The unit is in kilobyte.
EBS
– Specify the Excess Burst Size. The unit is in kilobyte.
Action
Conform
– This field denotes the green packet flow. Green packet flows may have their
DSCP
field rewritten to a value stated in this field. Users may also choose to count green
packets by using counter parameter.
Replace DSCP
– Packets that are in the green flow may have their DSCP field rewritten
