DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
264
Figure 11-87 CP-Client Status window
Use the drop-down menu to select a CP to see the information of the clients connected to the CP.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
SNMP Trap Configuration
This window is used to configure whether or not SNMP traps are sent from the Captive Portal and to specify
captive portal events that will generate a trap.
To view this window, click
Security > Captive Portal (CP) > SNMP Trap Configuration
as shown below:
Figure 11-88 SNMP Trap Configuration window
The fields that can be configured are described below:
Parameter
Description
Client Authentication
Failure Traps
Use the drop-down menu to enable or disable the SNMP agent sending a trap when a
client attempts to authenticate with a captive portal but is unsuccessful.
Client Connection
Traps
Use the drop-down menu to enable or disable the SNMP agent sending a trap when a
client authenticates with and connects to a captive portal.
Client Database Full
Traps
Use the drop-down menu to enable or disable the SNMP agent sending a trap each
time an entry cannot be added to the client database because it is full.
Client Disconnection
Traps
Use the drop-down menu to enable or disable the SNMP agent sending a trap when a
client disconnects from a captive portal.
Click the
Apply
button to accept the changes made for each individual section.
