DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
757
Chapter 87
Wireless Local Access
Point Database Command
List
create wireless ap_database
<macaddr>
delete wireless ap_database
[<macaddr> | all]
config wireless ap_database
<macaddr> [location [<desc 1-32> | clear] | mode [ws_managed
[profile [<int 1-16> | default] | password {encrypted <password 128>} | radio <int 1-2>
{channel <int 0-165> | power <int 0-100>}] | standalone [channel [<int 0-165> | default] |
security [any | open | wep | wpa | default] | ssid [<desc 1-32> | clear] | wire_mode [allowed |
not_allowed | default]] | rogue]]
show wireless ap_database
{<macaddr>}
87-1
create wireless ap_database
Description
This command is used to add an AP to the local valid AP database.
Format
create wireless ap_database <macaddr>
Parameters
<macaddr>
- Enter the MAC address of a physical AP here.
Restrictions
Only Administrators can issue this command.
Example
To add an AP to the local valid AP database:
DWS-3160-24PC:admin#create wireless ap_database 00-22-B0-3D-AB-40
Command: create wireless ap_database 00-22-B0-3D-AB-40
Success.
DWS-3160-24PC:admin#
87-2
delete wireless ap_database
Description
This command is used to delete an AP entry, using the specified MAC address, from the local
database or all the entries present from the database.
