DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
2
After correctly configuring the terminal, plug the power cable into the power receptacle on the back
of the Switch. The boot sequence will appear in the terminal.
Boot Procedure V1.00.001
------------------------------------------------------------------------------
Power On Self Test ........................................ 100 %
MAC Address : 00-01-02-03-04-00
H/W Version : A1
Please Wait, Loading V1.00.034 Runtime Image .............. 100 %
UART init ................................................. 100 %
Starting runtime image
Device Discovery .......................................... 100 %
Configuration init ........................................ |
After the boot sequence has been completed, the console login screen will be displayed.
The Switch supports user-based security that can allow prevention of unauthorized users from
accessing the Switch or changing its settings. This section will explain how to log into the Switch’s
Command Line Interface via the out-of-band console connection.
Upon initial connection to the Switch, the login screen appears (see example below).
DWS-3160-24PC Gigabit Ethernet Switch
Command Line Interface
Firmware: Build 1.00.034
Copyright(C) 2012 D-Link Corporation. All rights reserved.
UserName:
PassWord:
DWS-3160-24PC:admin#
By default, there is no
Username
and
Password
configured in the account settings of this Switch.
This will allow the user to simply connect to this Switch for the first time by pressing the ‘
Enter
’ key
twice.
After press
Enter
for both the Username and Password fields, access will be given to enter
commands after the command prompt (
DWS-3160-24PC:admin#
) appears.
