64
D-Link DWR-933 User Manual
Section 4 - Troubleshooting
• Configure your Internet settings:
- Go to
Start
>
Settings
>
Control Panel
. Double-click the
Internet Options
Icon. From the
Security
tab, click the
Default Level
button to restore the settings to their defaults.
- Click the
Connection
tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing
is checked. Click
OK
.
- Go to the
Advanced
tab and click the button to restore these settings to their defaults. Click
OK
three times.
- Close your web browser (if open) and re-open it.
2. What can I do if I forgot my password?
If you forgot your password, you must reset your router. Please note that this process will change all your settings back to the factory defaults. To
reset the router, open the battery cover and using a paper clip, press and hold this button for 6 seconds to reboot the unit. The DWR-933 will restore
the factory default settings. Replace the battery and turn the power on before you attempt to reconnect to it. The default IP address is 192.168.0.1,
and the default username is
admin
and the password should be left blank.
3. Why can’t my wireless client detect the 5 GHz network?
Due to changing regional wireless regulations, your older 5 GHz wireless client may have trouble detecting and connecting to the DWR-933’s 5 GHz
wireless network using its default settings.
For Taiwan region, this product defaults to band 1 (5.150-5.250 GHz), channels (36, 40, 44, and 48) operation. You may enable band 4 (5.725-5.825
GHz) channels (149, 153, 157, 161, or 165) by navigating to the Wi-Fi Settings section of the web based configuration utility described earlier in this
document and selecting a band 4 channel.
