6
D-Link DWR-933 User Manual
Section 2 - Installation
Installation
This section will guide you through the installation process.
Initial Setup
1. Ensure that your DWR-933 is powered off.
2. Remove the battery cover by lifting up on the bottom right corner of it, then remove the battery.
3. Push the SIM card slot cover down to unlock it, then lift it open.
Note:
Always unplug and turn off the router before installing or removing the SIM card. Never insert or remove the SIM card while the router is in use.
4. Insert the SIM card, ensuring that the alignment is the same as indicated by the logo next to the slot. The gold contacts on the card should be
facing downwards.
5. Lower the SIM card slot cover and push it up to lock it.
6. If you want to use a microSD card, you can insert it into the microSD card slot in the same manner as the SIM card.
7. Reinsert the battery and reattach the battery cover.
8. Fully charge the DWR-933 before use by connecting the supplied Micro USB cable to the USB charger. You may check the device’s battery status
while powered off by pressing the WPS button on the side of the device.
9. Press and hold the power button until the D-Link logo appears onscreen. After a few moments, the LCD will change to a home screen. The
network name (SSID) and password of the DWR-933 can be accessed from the LCD screen by pressing the Display/WPS button. For more details
on the LCD display, please refer to
LCD Display
on page
5
.
