D-Link DUA-2000 User Manual Download Page 77

Page: 77 / 95

D-Link DUA-2000 Policy Manager User Manual

Figure 10-16 – Telnet / SSH

The following fields are available in the

Telnet Setting

section:

Field

Description

Telnet Status

The status of the Telnet server on the Policy Manager. This can be set
to:

Enabled

Disabled

Telnet Port
Number

The Telnet port number. Default: 23, range: 1 - 65535.

Table 10-16 – Telnet Setting

The following fields are available in the

SSH Setting

section:

Field

Description

SSH Status

The status of the SSH server on the Policy Manager. This can be set
to:

Enabled

Disabled

Re-generate SSH
key

This is used to re-generate the private SSH key used by the Policy
Manager.

SSH Port Number

The SSH port number. Default: 22, range: 1 - 65535.

Table 10-17 – SSH Setting

Click

Save

to save the changes made.

Click

Cancel

to revert the settings to their previous state.

Summary of Contents for DUA-2000
































































































Search results

Summary of Contents for DUA-2000

Reviews:

Related manuals for DUA-2000

Brands by name

Popular brands

D-Link DUA-2000, User Manual

Search results

Summary of Contents for DUA-2000

Reviews:

Related manuals for DUA-2000

Brands by name

Popular brands