D-Link DUA-2000 User Manual Download Page 72

Page: 72 / 95

D-Link DUA-2000 Policy Manager User Manual

Port

The TCP port to use for SNMP traps.

Community

The community string to use for SNMP traps.

SNMP Version

The SNMP protocol version to use for SNMP traps.

Table 10-10 – SNMP Host List

Click

Add

to add a SNMP Host.

Click

Save

to save the changes made.

Click

Cancel

to revert the settings to their previous state.

Add SNMP Host

Click the

Add

Edit

buttons to view the following window:

Figure 10-11 – Add SNMP Host

The following fields can be configured:

Field

Description

IP Address

The IP address of the SNMP host receiving the traps from the Policy
Manager.

Port

The TCP port to use for SNMP traps. Default: 162, range: 1 – 65535.

Community

The community string to use for SNMP traps.

If the Authentication Type is set to

, this is taken from the

SNMP Community Table Setting on the SNMP Community page.

If the Authentication Type is set to

, this is taken from the SNMP v3

User List on the SNMP v3 User page.

Authentication
Type

The SNMP version to use for authentication. This can be set to:

Summary of Contents for DUA-2000
































































































Search results

Summary of Contents for DUA-2000

Reviews:

Related manuals for DUA-2000

Brands by name

Popular brands

D-Link DUA-2000, User Manual

Search results

Summary of Contents for DUA-2000

Reviews:

Related manuals for DUA-2000

Brands by name

Popular brands