D-Link DUA-2000 User Manual Download Page 84

Page: 84 / 95

D-Link DUA-2000 Policy Manager User Manual

Field

Description

Folder name

The folder on the USB device to save the backup file to.

Table 10-27 – Manually Backup

Click

Save to USB Port 1

to save the configuration to USB port 1

Click

Disconnect USB Port 1

to un-mount the USB device in USB port 1.

Click

Save to USB Port 2

to save the configuration to USB port 2

Click

Disconnect USB Port 2

to un-mount the USB device in USB port 2.

Restore System

This page can be used to restore the system configuration from a previous back up.

To get to the following page, browse to:

Maintenance >> Management >> Backup /

Restore System

and click on the

Restore System

tab:

Figure 10-22 – Restore System

The following fields are available in the

Restore from USB Port 1

section:

Field

Description

USB Device
Status

The USB device status of USB port 1. This can be:

Connected

Disconnected

Select Folder

The folder on the USB drive where the backup files are located.

Table 10-28 – Restore from USB Port 1

Click

Restore

to restore the system configuration from the backup

The following fields are available in the

Restore from USB Port 2

section:

Summary of Contents for DUA-2000
































































































Search results

Summary of Contents for DUA-2000

Reviews:

Related manuals for DUA-2000

Brands by name

Popular brands

D-Link DUA-2000, User Manual

Search results

Summary of Contents for DUA-2000

Reviews:

Related manuals for DUA-2000

Brands by name

Popular brands