D-Link DUA-2000 User Manual Download Page 70

Page: 70 / 95

D-Link DUA-2000 Policy Manager User Manual

MD5

SHA

Password

The password of the user, if

No-Auth

Auth No-Priv

have been

selected in the Security Level.

Privacy Algorithm

The encryption algorithm used to ensure privacy of the SNMP data. It
can be set to:

DES

AES

Table 10-8 – Edit SNMP V3 User

Click

Apply

to apply the settings

SNMP Traps

This is used to enable and disable SNMP traps on the Policy Manager.

To get to the following page, browse to:

Maintenance >> Management >> SNMP

and click

on the

SNMP Traps

tab:

Figure 10-9 – SNMP Traps

The following fields are available:

Field

Description

SNMP Traps

This is used to enable or disable SNMP traps and can be set to:

Enabled

Disabled

SNMP
Authentication
Trap

This is used to enable or disable SNMP Authentication Traps and can
be set to:

Enabled

Disabled

Linkchange Traps

This is used to enable or disable SNMP Linkchange Traps. These are

Summary of Contents for DUA-2000
































































































Search results

Summary of Contents for DUA-2000

Reviews:

Related manuals for DUA-2000

Brands by name

Popular brands

D-Link DUA-2000, User Manual

Search results

Summary of Contents for DUA-2000

Reviews:

Related manuals for DUA-2000

Brands by name

Popular brands