D-Link DSR-250N, User Manual

Page: 47 / 221

Unified Services Router
User Manual
45

NAT is a technique which allows several computers on a LAN to share an
Internet connection. The computers on the LAN use a "private" IP add ress
range while the WAN port on the router is configured with a single "public" IP
address. Along with connection sharing, NAT also hides internal IP addresses
from the computers on the Internet. NAT is required if your ISP has assigned
only one IP address to you. The computers that connect through the router will
need to be assigned IP addresses from a private subnet .

Transparent routing between the LAN and WAN does not perform NAT.
Broadcast and multicast packets that arrive on the LAN interface are swit ched
to the WAN and vice versa, if they do not get filtered by firewall or VPN
policies. To maintain the LAN and WAN in the same broadcast domain select
Transparent mode, which allows bridging of traffic from LAN to WAN and vice
versa, except for router -terminated traffic and other management traffic. All
DSR features (such as 3G modem support) are supported in transparent mode
assuming the LAN and WAN are configured to be in the same broadcast
domain.

NAT routing has a feature called ―NAT Hair -pinning‖ that allows internal network
users on the LAN and DMZ to access internal servers (eg. an internal FTP server)
using their externally-known domain name. This is also referred to as ―NAT
loopback‖ since LAN generated traffic is redirected through the firewall to reach
LAN servers by their external name.