D-Link DSR-250N, User Manual

Page: 194 / 221

Unified Services Router
User Manual
192
Invalid config data ERROR
Facility: Kernel
Log Message Severity Log Message Severity
DNAT: multiple ranges no longer
supported
DEBUG %s: %s%s:%d -> %s:%d %s, DEBUG
DNAT: Target size %u wrong for %u
ranges,
DEBUG %s: %s%s:%d %s, DEBUG
DNAT: wrong table %s, tablename DEBUG
%s: Failed to add WDS MAC: %s, dev-
>name,
DEBUG
DNAT: hook mask 0x%x bad,
hook_mask
DEBUG
%s: Device already has WDS mac
address attached,
DEBUG
%s%d: resetting MPPC/MPPE
compressor,
DEBUG
%s: Added WDS MAC: %s, dev-
>name,
DEBUG
%s%d: wrong offset value: %d, DEBUG
%s: WDS MAC address %s is not
known by this interface,
DEBUG
%s%d: wrong length of match value:
%d,
DEBUG
[madwifi] %s() : Not enough space.,
__FUNCTION__
DEBUG
%s%d: too big offset value: %d, DEBUG Returning to chan %d, ieeeChan DEBUG
%s%d: cannot decode offset value, DEBUG WEP DEBUG
%s%d: wrong length code: 0x%X, DEBUG AES DEBUG
%s%d: short packet (len=%d),
__FUNCTION__,
DEBUG AES_CCM DEBUG
%s%d: bad sequence number: %d,
expected: %d,
DEBUG CKIP DEBUG
%s%d: bad sequence number: %d,
expected: %d,
DEBUG TKIP DEBUG
PPPIOCDETACH file->f_count=%d, DEBUG
%s: cannot map channel to mode; freq
%u flags 0x%x,
DEBUG
PPP: outbound frame not passed DEBUG %s: %s, vap->iv_dev->name, buf DEBUG
PPP: VJ decompression error DEBUG %s: [%s] %s, vap->iv_dev->name, DEBUG
PPP: inbound frame not passed DEBUG
%s: [%s] %s, vap->iv_dev->name,
ether_sprintf(mac), buf
DEBUG
PPP: reconstructed packet DEBUG
[%s:%s] discard %s frame, %s, vap-
>iv_dev->name,
DEBUG
PPP: no memory for DEBUG
[%s:%s] discard frame, %s, vap-
>iv_dev->name,
DEBUG
missed pkts %u..%u, DEBUG
[%s:%s] discard %s information
element, %s,
DEBUG
%s%d: resetting MPPC/MPPE
compressor,
DEBUG
[%s:%s] discard information element,
%s,
DEBUG
%s%d: wrong offset value: %d, DEBUG
[%s:%s] discard %s frame, %s, vap-
>iv_dev->name,
DEBUG
%s%d: wrong length of match value:
%d,
DEBUG
[%s:%s] discard frame, %s, vap-
>iv_dev->name,
DEBUG
%s%d: too big offset value: %d, DEBUG ifmedia_add: null ifm DEBUG
%s%d: cannot decode offset value, DEBUG Adding entry for DEBUG
%s%d: wrong length code: 0x%X, DEBUG ifmedia_set: no match for 0x%x/0x%x, DEBUG
%s%d: short packet (len=%d),
__FUNCTION__,
DEBUG ifmedia_set: target DEBUG
%s%d: bad sequence number: %d,
expected: %d,
DEBUG ifmedia_set: setting to DEBUG