manualshive.com logo in svg

D-Link DSL-2750, User Manual, Page: 9 / 132

Share
Download
D-Link DSL-2750 User Manual Download Page 9

5

D-Link DSL-2750B Wireless N300 ADSL2+ Modem Router User Manual

Section 1 - Product Overview

Hardware Overview

LEDs

1

Power LED

A solid green light indicates the unit is powered on. A red light indicates device malfunction.

2

LAN LEDs 1-4

A solid green light indicates a valid link on startup. These lights blink when there is activity currently 

passing through the Ethernet port.

3

WLAN LED

A solid green light indicates a wireless connection. A blinking green light indicates activity on the WLAN.

4

WPS LED

A solid blue light indicates a successful connection with the client. A blinking light indicates WPS is 

triggered and looking for a client.

5

USB LED

A solid light indicates that the wireless networks are ready.

6

ADSL LED

A solid green light indicates a valid ADSL connection. This will light after the ADSL negotiation process 

has been settled. A blinking green light indicates activity on the WAN (ADSL) interface.

7

Internet

A solid green light indicates a successful Internet connection. A blinking light indicates Internet is 

connected and data is being transmitted. A red light indicates that IP assignment has failed.

2

4

1

3

5

5

6

7

Summary of Contents for DSL-2750





































































































































Reviews:

No comments