manualshive.com logo in svg

D-Link DSL-2750, User Manual, Page: 28 / 132

Share
Download
D-Link DSL-2750 User Manual Download Page 28

24

D-Link DSL-2750B Wireless N300 ADSL2+ Modem Router User Manual

Section 3 - Configuration

Local IPv6 Network

This section enables you to specify various IPv6 settings.

IPv6 Address:

Use this option to specify a static IPv6 Address.

Enable RADVD:

Enable or disable the Router Advertisement Daemon.

Enable DHCPv6 

Server:

Enable or disable the DHCPv6 server function.

Lan Address 

Config Mode:

Select either stateless (host requests) or stateful (server 

provisions) LAN IPv6 addressing.

Start/End 

Interface ID:

Enter the range of IP addresses the DHCPv6 server can issue 

from.

DHCPv6 Lease 

Time:

The lease time determines the period that the host retains the 

assigned IP addresses before the IP addresses change.

DHCPv6 Valid 

Time:

Specify the period for which an assigned IPv6 address remains 

valid.

IPv6 DNS Mode:

Allow the router to accept the first received IPv6 DNS 

assignment from a WAN connection. Alternatively, you can 

manually enter the IP addresses for primary and secondary 

IPv6 DNS servers.

WAN Interface:

Specify the WAN interface to be used.

Primary DNS:

Enter an address for a preferred DNS server.

Secondary DNS:

Enter an address for an alternate DNS server.

Get Prefix Mode:

Use this option to specify whether IPv6 prefix delegation is 

assigned manually or via a WAN interface.

WAN Interface:

Specify the WAN interface to be used. for IPv6 prefix delegation.

Site Prefix:

Manually assign an IPv6 prefix delegation.

Summary of Contents for DSL-2750





































































































































Reviews:

No comments