manualshive.com logo in svg

D-Link DSL-2750, User Manual, Page: 121 / 132

Share
Download
D-Link DSL-2750 User Manual Download Page 121

117

D-Link DSL-2750B Wireless N300 ADSL2+ Modem Router User Manual

Appendix D - Regulatory Information

Malti [Maltese]

Hawnhekk, D-Link, jiddikjara li dan DSL-2750B jikkonforma mal-ħtiġijiet essenzjali u ma 

provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.

Magyar [Hungarian]

Alulírott, D-Link nyilatkozom, hogy a DSL-2750B megfelel a vonatkozó alapvetõ 

követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.

Polski [Polish]

Niniejszym D-Link oświadcza, że DSL-2750B jest zgodny z zasadniczymi wymogami oraz 

pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.

Português [Portuguese]

D-Link declara que este DSL-2750B está conforme com os requisitos essenciais e outras 

disposições da Directiva 1999/5/CE.

Slovensko [Slovenian]

D-Link izjavlja, da je ta DSL-2750B v skladu z bistvenimi zahtevami in ostalimi relevantnimi 

določili direktive 1999/5/ES.

Slovensky [Slovak]

D-Link týmto vyhlasuje, že DSL-2750B spĺňa základné požiadavky a všetky príslušné 

ustanovenia Smernice 1999/5/ES.

Suomi [Finnish]

D-Link vakuuttaa täten että DSL-2750B tyyppinen laite on direktiivin 1999/5/EY oleellisten 

vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.

Warning Statement

The power outlet should be nearby the device and easily accessible.

Safety Instructions

Please adhere to the following safety guidelines to help ensure your own personal safety and protect your system from potential 

damage. Any acts taken that are inconsistent with ordinary use of the product, including improper testing, etc., and those not 

expressly approved by D-Link may result in the loss of product warranty.

Unless expressly approved by an authorized representative of D-Link in writing, you may not and may not permit others to:

• Disassemble or reverse engineer the device or attempt to derive source code (underlying ideas, algorithms, or structure) from 

the device or from any other information provided by D-Link, except to the extent that this restriction is expressly prohibited 

by local law.

• Modify or alter the device.

• Remove from the device any product identification or other notices, including copyright notices and patent markings, if any.

Summary of Contents for DSL-2750





































































































































Reviews:

No comments