manualshive.com logo in svg

D-Link DSL-2750, User Manual, Page: 58 / 132

Share
Download
D-Link DSL-2750 User Manual Download Page 58

54

D-Link DSL-2750B Wireless N300 ADSL2+ Modem Router User Manual

Section 3 - Configuration

DNS

Domain name system (DNS) is an Internet service that translates 

domain names into IP addresses. Because domain names are 

alphabetic, they are easier to remember. The Internet, however, is 

actually based on IP addresses. Each time you use a domain name, 

a DNS service must translate the name into the corresponding IP 

address. For example, the domain name www.example.com might 

be translated to 198.105.232.4.

The DNS system is, in fact, its own network. If one DNS server does 

not know how to translate a particular domain name, it asks another 

one, and so on, until the correct IP address is returned.

WAN 

Connection:

Select WAN connection you wish to configure.

IPv4 Static DNS:

Check to enable static DNS for this DNS server.

Preferred DNS 

Server:

Enter the provided DNS server IP address.

Alternate DNS 

Server:

Enter the secondary DNS server IP address.

Summary of Contents for DSL-2750





































































































































Reviews:

No comments