D-Link DSL-2750 User Manual Download Page 65

Page: 65 / 132

D-Link DSL-2750B Wireless N300 ADSL2+ Modem Router User Manual

Section 3 - Configuration

UPnP

This page enables you to enable the UPnP feature.

UPnP (Universal Plug and Play) is a distributed, open networking

standard that uses TCP/IP for simple peer-to-peer network

connectivity between devices. A UPnP device can dynamically join

a network, obtain an IP address, convey its capabilities and learn

about other devices on the network. In turn, a device can leave a

network smoothly and automatically when it is no longer in use.

UPnP broadcasts are only allowed on the LAN.

UPnP is used for popular audio visual software. It allows automatic

discovery of your device in the network. If you are concerned about

UPnP security, you can disable it. Block ICMP ping should be enabled

so that the device does not respond to malicious Internet requests.

Enable UPnP:

Check to enable or disable UPnP.

Summary of Contents for DSL-2750





































































































































Search results

Summary of Contents for DSL-2750

Reviews:

D-Link DSL-2750, User Manual, Page: 65 / 132

Search results

Summary of Contents for DSL-2750

Reviews: