manualshive.com logo in svg

D-Link DSL-2750, User Manual, Page: 22 / 132

Share
Download
D-Link DSL-2750 User Manual Download Page 22

18

D-Link DSL-2750B Wireless N300 ADSL2+ Modem Router User Manual

Section 3 - Configuration

Internet Setup

Click 

Internet Setup

 on the left menu to configure your connection 

manually.

If you want to configure your router to connect to the Internet using 

the wizard, click 

Wizard

 on the left menu and you will be directed 

to the Quick Setup Wizard. 

Click the 

Add 

button to reveal the DSL configuration options, or click 

Edit

 to change an existing configuration.

The following parameters will be available for configuration:

VPI:

Virtual path identifier (VPI) is the virtual path between two 

points in an ATM network. Its valid value is between 0 and 

255. Enter the correct VPI provided by your ISP. By default, VPI 

is set to 1.

VCI:

Virtual channel identifier (VCI) is the virtual channel between 

two points in an ATM network. Its valid value is between 1 and 

65535. Enter the correct VCI provided by your ISP. By default, 

VCI is set to 32.

Service 

Category:

Select the Quality of Service types for this Virtual Circuit. The 

ATM QoS types include CBR (Constant Bit Rate), VBR (Variable 

Bit

Rate) and UBR (Unspecified Bit Rate). These QoS types are all 

controlled by the parameters specified below, including PCR, 

SCR and MBS. 

Peak Cell Rate:

Peak cell rate (PCR) is the maximum rate at which cells can be 

transmitted along a connection in the ATM network.

Summary of Contents for DSL-2750





































































































































Reviews:

No comments