D-Link DSL-2750 User Manual Download Page 62

Page: 62 / 132

D-Link DSL-2750B Wireless N300 ADSL2+ Modem Router User Manual

Section 3 - Configuration

IGMP Proxy

Creating an IGMP proxy enables the system to issue IGMP host

messages on behalf of hosts that the system has discovered through

standard IGMP interfaces. This allows the system to act as a proxy for

its hosts after being enabled.

WAN Interface:

Select the WAN interface you wish to configure.

IGMP Version:

Select either IGMP V1, IGMP V2, or IGMP V3 from the list.

Enable IGMP

Proxy:

Check this box to enable IGMP proxy.

LAN

Connection:

Select the LAN connection to use.

Enable

FastLeaving:

Check this box to enable FastLeaving.

General Query/

Response

Interval:

Enter the query interval and query response interval in box.

Group Query/

Response

Interval:

Enter the group query interval and the group query response

interval in the box.

Group Query

Count:

Enter the group query count in the box.

Last Member

Query Interval:

Enter the last member query interval in the box.

Last Member

Query Count:

Enter the last member query count in the box.

Summary of Contents for DSL-2750





































































































































Search results

Summary of Contents for DSL-2750

Reviews:

D-Link DSL-2750, User Manual, Page: 62 / 132

Search results

Summary of Contents for DSL-2750

Reviews: