40
D-Link DSL-226 User Manual
Section 4 - Configuration
NAT Enable:
Network address translation (NAT) translates private IP addresses to
public IP addresses before allowing private IP networks to connect
to the public network.
Authentication
Protocol:
Select the authentication protocol your ISP uses. The options are
Auto
,
PAP
, or
CHAP.
Enable PPPoE
Passthrough:
Enable or disable PPPoE traffic to pass through this configuration. It
allows hosts behind the router to establish a PPPoE connection to
an external server.
G.Vector
This option raises VDSL2 connection's data date and cover range by
eliminating cross-talk in copper infrastructure. This is only available
for VDSL.
Connect Mode
Select:
Set the connection to be
Always-on
or
Connect-On-Demand
.
If you selected
Connect-On-Demand
, the following option is available:
Maximum Idle
Time:
Enter the amount of time in minutes the router will maintain the
Internet connection before disconnecting it if there is no activity.
IPv6 Settings
DHCP IPv6 Mode:
Select the IPv6 auto-configuration type:
StateLess Address
AutoConfiguration (SLAAC)
or
Dynamic Host Configuration
Protocol (DHCP)
.
DHCP PD
Enable:
Enable or disable prefix delegation.
MLD Proxy:
Multicast Listener Discovery (MLD) can be used to forward IPv6
multicast traffic between another router and the hosts behind this
router.
Click
Save
when you are done.
