34
D-Link DSL-226 User Manual
Section 4 - Configuration
Internet - Ethernet
Your DSL-226 is equipped with a multi-purpose Megabit Ethernet LAN/WAN port which can
be used to connect to the Internet. This port can also be used to connect to other Ethernet
based networks. In order for your DSL-226 to use Ethernet, you must configure the WAN
Connection Type and related WAN settings.
Configure your
WAN connection:
Select
Ethernet
to configure Ethernet connection settings. To use the
LAN/WAN port for WAN connection, please enable the
LAN to WAN
Setting
control to designate the LAN/WAN port on the back of the
device as a physical WAN port (go to
Settings > Network > Advanced
Settings
). The default is disabled (i.e. a LAN port).
VLAN Settings
Enable Vlan ID:
Enable or disable VLAN settings.
Vlan ID:
Enter the VLAN ID. Enter a value from 1 - 4094.
IPv4 Settings
Connection:
Select the connection method for your Internet and refer to the
respective configuration page for setup information.
For Dynamic IP (DHCP) Address, refer to
For Static IP Address, refer to
.
For PPPoE, refer to
Connection Type: PPPoE on page 39.
For PPPoA, refer to
Connection Type: PPPoA on page 41.
For Bridge Mode, refer to
