43
D-Link DSL-226 User Manual
Section 4 - Configuration
Connection Type: Bridge Mode
Select
Bridge Mode
to use the DSL-226 as a network bridge to extend an
existing network.
IPv4 Settings
Connection:
Select
Bridge Mode
.
Protocol
Select
IPv4, IPv6
or
IPv4/IPv6
for both IPv4 and IPv6 addressing
mechanism.
Connection Type:
Select
Bridged Only LLC
or
Bridged Only VC-Mux
as the
encapsulation method. This is only available for ADSL and Ethernet
WAN Connection Type.
Enable
Large Packet
Passthrough:
Enable this option to allow large packets (greater than 9000 bytes).
This option is only available for VDSL and ADSL types.
G.Vector
This option raises VDSL2 connection's data date and cover range by
eliminating cross-talk in copper infrastructure. This is only available
for VDSL.
Click
Save
when you are done. Or click
Delete
to delete the configuration
profile for the interface.
