55
D-Link DSL-226 User Manual
Section 4 - Configuration
Enable DHCP
Server:
Select this option to enable the DHCP server.
Enter the following settings to configure your DHCP server:
DHCP IP
Address Range:
Specify the start and end IP addresses for the range of addresses to
be assigned by your router.
DHCP Lease Time:
Select the DHCP lease time from the drop down menu:
1 Hour, 2
Hours, 3 Hours, 1 Day, 2 Days, 3 Days,
or
1 Week
. The default is
1
Day
.
Primary DNS
Server:
The Domain Name System (DNS) translates domain or website names
into Internet addresses or URLs. Enter the DNS server's IP address.
Secondary DNS
Server:
Enter the secondary DNS server's IP address.
Option60 Vendor
ID:
Enter Option 60 information here to be included in the DHCP request
communication.
DHCP Relay:
Select this option to enable DHCP Relay. Use this if you have a
dedicated DHCP server on your network, then enter the server IP
address.
Click
Save
when you are done.
LAN IPv6 Settings
IPv6 Global
Address:
Enter a valid IPv6 address with prefix length, for example,
2000:dc8:abcd:0015::0/64
Radvd
Enable:
Enable or disable the Router Advertisement Daemon (RADVD) for
advertising the essential network configuration for the local network
with other devices using IPv6 addressing scheme.
Network - Advanced Settings
