68
D-Link DSL-226 User Manual
Section 4 - Configuration
Destination IP
Address/Subnet
Mask/Port:
Enter the destination IP address (and subnet mask) and port that
the rule will apply to. Enter 0.0.0.0 for any IP address and 0 for any
port number.
Protocol:
Select the network protocol for the traffic:
TCP, UDP,
or
ICMP
.
Click
Set
when you finished setting the rule. You can create up to 16 rules.
The created rule should be listed in the below table. To delete a rule, select
IP/MAC Filter
as the Filter Type, and select the respective
Rule Index
, then
click
Delete
. To edit a rule, select the respective Rule Index, modify the
configuration, then click
Set.
Configure the following settings for URL filtering
:
Filter Type
Selection:
Select URL Filter.
Active:
Select Yes or No to enable or disable URL filtering.
URL Index:
Select the rule number for configuration (1-8).
Individual
Active:
Select Yes or No to activate or deactivate this filtering rule.
Rule Type:
Enter the name for the website. This blocks access to websites based
on a website's address. For example, enter "ABC.com" or "www.ABC.
com." Or you may enter the corresponding IP address of a web server.
Click
Set
when you finished setting the rule. You can create up to 8 rules.
The created rule should be listed in the below table. To delete a rule, select
URL Filter
as the Filter Type, and select the respective
Rule Index
, then
click
Delete
. To edit a rule, select the respective Rule Index, modify the
configuration, then click
Set.
