D-Link DPN-1021G User Manual Download Page 9

Page: 9 / 145

DPN-1021G

GPON ONT VoIP Gateway with 1 GPON

Port, 1 10/100/1000Base-T Port, 1 10/100Base-TX Port,
and 1 FXS Port

User Manual

Overview

Product Appearance

Upper Panel

Figure 1. Upper panel view.

LED

Mode

Description

POWER

Solid green

The gateway is powered on.

No light

The gateway is powered off.

GPON

Solid green

The gateway is synchronized with the OLT device.

Blinking green

Synchronization with the OLT device is in progress.

No light

The fiber optic cable is not connected.

Internet

Solid green

The connection is on.

No light

The connection is off.

VoIP

Solid green

The phone is registered on the SIP server.

Blinking green

Dialing a number, making or accepting a call.

No light

The phone is not registered on the SIP server.

Page

of 145

Summary of Contents for DPN-1021G


















































































































































Search results

Summary of Contents for DPN-1021G

Reviews:

Related manuals for DPN-1021G

Brands by name

Popular brands

D-Link DPN-1021G, User Manual

Search results

Summary of Contents for DPN-1021G

Reviews:

Related manuals for DPN-1021G

Brands by name

Popular brands