D-Link DPN-1021G User Manual Download Page 24

Page: 24 / 145

DPN-1021G

GPON ONT VoIP Gateway with 1 GPON

Port, 1 10/100/1000Base-T Port, 1 10/100Base-TX Port,
and 1 FXS Port

User Manual

Installation and Connection

Menu Sections

To configure the gateway use the menu in the left part of the page.
The pages of the

Statistics

section display data on the current state of the gateway (for the

description of the pages, see the

Statistics

section, page 28).

The pages of the

Connections Setup

section are designed for configuring basic parameters of

the LAN interface of the gateway and creating a connection to the Internet (for the description of
the pages, see the

Connections Setup

section, page 35).

The pages of the

Advanced

section are designed for configuring additional parameters of the

gateway (for the description of the pages, see the

Advanced

section, page 65).

The pages of the

VoIP

section are designed for specifying all settings needed for VoIP (for the

description of the pages, see the

VoIP

section, page 94).

The pages of the

Firewall

section are designed for configuring the firewall of the gateway (for the

description of the pages, see the

Firewall

section, page 115).

The pages of the

System

section provide functions for managing the internal system of the

gateway (for the description of the pages, see the

System

section, page 126).

The pages of the

Yandex.DNS

section are designed for configuring the

Yandex.DNS web content

filtering service

(for the description of the pages, see the

Yandex.DNS

section, page 139).

To exit the web-based interface, click the

Logout

line of the menu.

Page

of 145

Summary of Contents for DPN-1021G


















































































































































Search results

Summary of Contents for DPN-1021G

Reviews:

Related manuals for DPN-1021G

Brands by name

Popular brands

D-Link DPN-1021G, User Manual

Search results

Summary of Contents for DPN-1021G

Reviews:

Related manuals for DPN-1021G

Brands by name

Popular brands