DPN-1021G
GPON ONT VoIP Gateway with 1 GPON
Port, 1 10/100/1000Base-T Port, 1 10/100Base-TX Port,
and 1 FXS Port
User Manual
Installation and Connection
Connecting to Web-based Interface
When you have configured your computer, you can access the web-based interface and configure
needed parameters (create a WAN connection, configure VoIP, specify the settings of the firewall,
etc.).
!
For security reasons,
DPN-1021G
with default settings cannot connect to the Internet. To
get started, please set your own password used to access the web-based interface and, if
needed, configure other settings recommended by your ISP.
Start a web browser (see the
section, page 13). In the address bar of the web
browser, enter the IP address of the gateway (by default,
192.168.0.1
). Press the
Enter
key.
Figure 8. Connecting to the web-based interface of the DPN-1021G device.
!
If the error “
The page cannot be displayed
” (or “
Unable to display the page
”/“
Could not
connect to remote server
”) occurs upon connecting to the web-based interface of the
gateway, make sure that you have properly connected the gateway to your computer.
If the device has not been configured previously or the default settings have been restored, after
access to the web-based interface the Initial Configuration page opens (see the
Figure 9. The Initial Configuration page.
Page
20
of 145
