DPN-1021G
GPON ONT VoIP Gateway with 1 GPON
Port, 1 10/100/1000Base-T Port, 1 10/100Base-TX Port,
and 1 FXS Port
User Manual
Configuring via Web-based Interface
Alarm Clock
On the
VoIP / Alarm clock
page, you can configure the phone connected to the FXS port of the
gateway as an alarm clock.
Figure 84. The
VoIP / Alarm clock
page.
Move the
Enable
switch to the right. Then specify the time at which the phone should ring in the
Hour
and
Minutes
fields. In the
Ring time
field, specify the signal duration. Then click the
APPLY
button.
!
When the
gateway
is powered off or rebooted, the system time is reset to the default
value. If you have set automatic synchronization for the system time, the internal clock of
the device will be configured after connecting to the Inter
net. If you have set the system
time manually, you need to set the time and date again.
Page
114
of 145
