D-Link DPN-1021G User Manual Download Page 25

Page: 25 / 145

DPN-1021G

GPON ONT VoIP Gateway with 1 GPON

Port, 1 10/100/1000Base-T Port, 1 10/100Base-TX Port,
and 1 FXS Port

User Manual

Installation and Connection

Notifications

The gateway's web-based interface displays notifications in the top right part of the page.

Figure 12. The web-based interface notifications.

Click the icon displaying the number of notifications to view the complete list and click the relevant
button.

Note that you should regularly save the changes of the gateway's settings to the non-
volatile memory.

To save the settings of the gateway, click the

SAVE

button.

You can also save the gateway's settings on the

System / Configuration

page (

see the

Configuration

section, page 127).

Page

of 145

Summary of Contents for DPN-1021G


















































































































































Search results

Summary of Contents for DPN-1021G

Reviews:

Related manuals for DPN-1021G

Brands by name

Popular brands

D-Link DPN-1021G, User Manual

Search results

Summary of Contents for DPN-1021G

Reviews:

Related manuals for DPN-1021G

Brands by name

Popular brands