DPN-1021G
GPON ONT VoIP Gateway with 1 GPON
Port, 1 10/100/1000Base-T Port, 1 10/100Base-TX Port,
and 1 FXS Port
User Manual
Configuring via Web-based Interface
Routing call
On the
VoIP / Routing call
page, you can fill in the phone book for a device connected to the FXS
port of the gateway.
Figure 79. The
VoIP / Routing call
page.
In the
Speed Dial
section, you can assign phone numbers to the digital keys of the phone set
connected to this line. To do this, left-click the line corresponding to the key of the phone set. In the
opened window, enter the needed number in the
Number
field and click the
SAVE
button. Also
you can specify a number in the format
phone_number@IP_address
for direct IP calls by
passing the SIP proxy server.
To change or delete the number assigned to the digital key, left-click the line corresponding to the
key of the phone set, in the opened window, edit or remove the value of the
Number
field and click
the
SAVE
button.
To use a number specified in the
Speed Dial
section, press
#
(the pound key) on the phone set,
then press the relevant digital key.
In the
Abbreviated Dial
section, you can assign short numbers (as a rule, such numbers consist of
two or three digits) to frequently used phone numbers. To do this, click the
Add
button. In the
opened window, enter a short number in the
Source number
field, then enter the actual phone
number in the
Destination number
field. Click the
SAVE
button. Also in the
Destination
number
field you can specify a number in the format
phone_number@IP_address
for direct
IP calls by passing the SIP proxy server.
To change a short or actual phone number, select of the relevant line in the table. In the opened
window, change needed parameters and click the
SAVE
button.
To remove a phone number, select the checkbox located to the left of the relevant line in the table
and click the
Delete
button.
Page
108
of 145
