DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
22
Parameter
Description
From Port / To Port
Select the appropriate port range used for the configuration here.
State
Select this option to enable or disable the physical port here.
MDIX
Select the Medium Dependent Interface Crossover (MDIX) option
here. Options to choose from are Auto, Normal, and Cross.
Auto
- Select this option for auto-sensing of the optimal type of
cabling.
Normal
- Select this option for normal cabling. If this option is
selected, the port is in the MDIX mode and can be connected to a
PC’s NIC using a straight-through cable or a port (in the MDIX
mode) on another switch through a cross-over cable.
Cross
- Select this option for cross cabling. If this option is
selected, the port is in the MDI mode and can be connected to a
port (in the MDIX mode) on another switch through a straight
cable.
Flow Control
Select to either turn flow control On or Off here. Ports configured
for full-duplex use 802.3x flow control, half-duplex ports use back-
pressure flow control, and Auto ports use an automatic selection of
the two.
Duplex
Select the duplex mode used here. Options to choose from are
Auto, Half, and Full.
Speed
Select the port speed option here. This option will manually force
the connected on the selected port to only connect at the speed
specified here. Options to choose from are Auto, 10M, 100M,
1000M.
Description
Enter a 64 characters description for the corresponding port here.
Click the
Apply
button to accept the changes made.