D-Link Dis-200G Series Web Ui Reference Manual Download Page 132

Page: 132 / 161

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch

121

This displays the IP address and MAC
address of the IP camera.

This displays the description for the IP

camera. Click the

icon to modify the

description

Enter the description for the IP camera

here. Click the

icon to apply the

modified description.

NVR Information

This window is used to display NVR information.
To view the following window, click

NVR Information

, as shown below:

Guide

The following icons are available in this window and are described below:

Parameter

Description

This displays the total amount of NVRs
connected to the Ethernet ports on the Switch.

This displays the Ethernet port number on the
Switch.

This displays a generic photo of the NVR
connected to the port.

This displays the IP address and MAC
address of the NVR.

Figure 12-10

NVR Information window

Summary of Contents for Dis-200G Series


































































































































































Search results

Summary of Contents for Dis-200G Series

Reviews:

Related manuals for Dis-200G Series

Brands by name

Popular brands

D-Link Dis-200G Series, Web Ui Reference Manual

Search results

Summary of Contents for Dis-200G Series

Reviews:

Related manuals for Dis-200G Series

Brands by name

Popular brands